Best Robotic Pool Cleaners: Corded vs. Cordless, Beatbot vs. Aiper vs. Dolphin vs. ECOVACS
Corded or cordless? How Beatbot, Aiper, Dolphin and ECOVACS pool robots differ on coverage, leaves, fine silt, waterline scrubbing and sun shelves.
A robotic pool cleaner drives the floor and walls on its own and filters debris into an onboard basket. The big split is power: cordless robots run on a battery and get lifted out to charge, while corded robots plug into a power supply on the deck and can run on a weekly timer.
The spec sheet is a poor guide. Some robots with cameras and mapping sensors cover less of the pool than plain random-pattern models. What matters is your pool: leaves or fine silt, a steady or changing water line, a shallow sun shelf or none. Here's how the leading Beatbot, Aiper, Dolphin and ECOVACS robots differ on each.
Quick verdict
- Best cordless robot for most pools: the Beatbot Sora 10: the widest coverage here, strong suction and an oversized basket.
- Best for pollen, sand and silt: the ECOVACS Ultramarine P1, with a fine second filter and the best waterline scrubbing.
- Best cordless for leaves and fine debris together: the Dolphin Nautilus EON 100, thanks to a very fine filter and a big bin.
- Best for steps and shallow ledges: the Beatbot Sora 30, which climbs onto ledges about 8 inches deep.
- Lightest to lift out: the Aiper Scuba S1.
- Best corded robot for small and mid-size pools: the Dolphin Cayman, with a weekly timer in the box.
The pool robots side by side
| Pool robot | Shop | Power | Main filter | Waterline | Shallow ledge | Best for |
|---|---|---|---|---|---|---|
| Beatbot Sora 10 | Cordless | 150-micron basket, 5 L | Cleans it | No (rated for 12 in and deeper) | Coverage, leaves | |
| ECOVACS Ultramarine P1 | Cordless | 180-micron mesh plus 3-micron inner filter | Reaches the coping, scrubs hard | Yes, about 8 in | Pollen, sand, silt | |
| Dolphin Nautilus EON 100 | Cordless, weekly timer | Very fine filter (listed at 70 microns) | Reaches about 3 in up, light scrub | Didn't climb an 8 in shelf | Leaves and silt | |
| Beatbot Sora 30 | Cordless | 150-micron basket, about 5 L | Cleans it | Yes, about 8 in | Steps, ledges, larger pools | |
| Aiper Scuba S1 | Cordless | 180-micron mesh plus floss basket | At the water line | No | Light lifting, simple pools | |
| Dolphin Cayman | Corded, weekly timer | Top-load bin, optional finer filters | Climbs walls, no waterline scrub | Not listed | Hands-off small to mid pools |
Best overall cordless
Beatbot Sora 10
The widest coverage of walls, floor and steps here, strong suction and an oversized open-top basket that's quick to empty.
- Cordless
- 5 L basket
- 150-micron filter
Good for
- Pools with leaves
- Owners who want the most coverage per run
Skip it if
- Your main problem is fine silt or pollen
- You have a shallow sun shelf
Corded vs. cordless pool robots
A cordless robot has no cable to tangle and nothing to plug in by the pool. The cost is a routine: after each run you lift it out (often 40 to 55 pounds while water drains) and charge it for several hours. A few, including the Dolphin Nautilus EON 100, can spread a week of short cleans across one charge.
A corded robot draws steady power from the deck, so suction never fades with a battery. With a weekly timer it runs every day, every other day or every third day on its own, and the regular chore is rinsing the filter once or twice a week. Better models add a cable swivel to stop tangles and tracks that grip walls better than wheels. The trade-off is the cable and the outlet it needs.
Cordless robots run on lithium-ion batteries, and a few have been recalled for overheating, including the Aiper Seagull Pro (CPSC recall notice). Charge only with the supplied charger, and check the CPSC recall list before buying a used one.
What separates a good pool robot from a mediocre one
Coverage has little to do with features
Robots that keep a combined wall-and-floor pattern for the whole run reach the most of the pool; those that switch to floor-only mode after a set time often miss steps and benches. Mapping hardware is no guarantee: one lidar-mapping robot gets confused in a pool with a sloped floor, which it isn't built to handle yet.
Leaves need suction, a big bin and a gentle exhaust
For leaf litter, look for suction strong enough to pull in leaves beside the robot, not just under it, and a large basket. Robots that blow water out the back kick leaves up off the floor whenever they turn near a wall, and anything sent into the water column usually settles back down uncleaned. The Dolphin Nautilus EON 100 picks up leaves well but is the worst offender for this. A firmware change on the Aiper Scuba S1 now cuts suction when it tilts, which stirs up fewer leaves than before.
Pollen, sand and silt need a fine filter
Screened pools usually fight fine particles instead, and the common 180-micron mesh shoots silt and pollen straight back into the pool. The robots that capture it are the ones with a much finer filter or a dense second layer: the ECOVACS Ultramarine P1, the Dolphin Nautilus EON 100 and the WYBOT S3. Both Aiper robots still kick up some sand despite their floss inner baskets, the V3 more than the S1. The two Beatbots use a slightly finer 150-micron basket, which still won't trap algae or fine silt.

Waterline reach and water level
Pollen and sunscreen film collect on the waterline tile. If your water level changes, pick a robot that climbs well above it: the ECOVACS Ultramarine P1 reaches all the way to the coping and scrubs hard, and the Dolphin Nautilus EON 100 climbs about 3 inches above the water with a lighter scrub. If your level stays constant, the Aiper Scuba V3's waterline mode, which drives sideways along the tile, works well.
Sun shelves and tanning ledges
Most robots won't climb onto an 8-inch shelf. The Aiper Scuba V3, ECOVACS Ultramarine P1 and Beatbot Sora 30 do and clean on top, though the Ultramarine climbs so eagerly it could drive out over a low edge. Ledges around 4 inches deep are beyond all of them.
Day-to-day handling
Cordless robots weigh about 50 pounds coming out of the water and under 25 once drained. Open-top baskets, like the Beatbot Sora 10's, empty fastest; hinged tops with a separate floss insert, like both Aipers, take longest. The Dolphin Nautilus EON 100 and ECOVACS Ultramarine P1 baskets hold every particle as you lift; most others drop a few.
Best for fine silt
ECOVACS Ultramarine P1
A fine second filter that holds sand and pollen, plus the strongest waterline scrubbing of the group.
- Cordless
- 180 + 3 micron filters
- Up to 1,937 sq ft
Good for
- Screened pools
- Pollen and fine sand
- Pools whose water level changes
Skip it if
- Lots of leaves
- Long runs on one charge
The picks in detail
Beatbot Sora 10: best cordless robot for most pools
The Beatbot Sora 10 keeps one wall-and-floor pattern for a run of nearly five hours and reaches almost all of the walls and floor plus about two-thirds of the steps and bench. Its suction keeps leaves from drifting off, and its open-top basket holds about twice what most rivals do. The limits: it won't clean a sun shelf shallower than about a foot, and its 150-micron basket lets fine silt and pollen through.
Best overall cordless
Beatbot Sora 10
The widest coverage of walls, floor and steps here, strong suction and an oversized open-top basket that's quick to empty.
- Cordless
- 5 L basket
- 150-micron filter
Good for
- Pools with leaves
- Owners who want the most coverage per run
Skip it if
- Your main problem is fine silt or pollen
- You have a shallow sun shelf
ECOVACS Ultramarine P1: best for pollen, sand and silt
The ECOVACS Ultramarine P1 pairs a 180-micron mesh with a 3-micron inner filter and actually keeps sand and silt in the basket. It is also the best waterline cleaner in the group, climbing to the coping and scrubbing pollen off the tile. Runs are shorter, a little over two hours, step coverage is modest, and the very small basket is a poor fit for heavy leaf drop.
Best for fine silt
ECOVACS Ultramarine P1
A fine second filter that holds sand and pollen, plus the strongest waterline scrubbing of the group.
- Cordless
- 180 + 3 micron filters
- Up to 1,937 sq ft
Good for
- Screened pools
- Pollen and fine sand
- Pools whose water level changes
Skip it if
- Lots of leaves
- Long runs on one charge
Dolphin Nautilus EON 100: best cordless for leaves and silt together
The Dolphin Nautilus EON 100 has a much finer filter than most cordless robots and a large basket, so it handles both leaves and fine silt. It reaches about 3 inches above the water line. Its navigation looks closer to random than mapped, so it can miss a stretch of wall, its rear exhaust stirs debris near walls, and at about 56 pounds out of the water it's the heaviest here.
Best for leaves and silt
Dolphin Nautilus EON 100
A very fine filter and a big bin, so it handles leaves and fine silt in the same run.
- Cordless
- Pools up to 50 ft
- Weekly timer
Good for
- Pools with trees and fine debris
- Owners who like a weekly schedule
Skip it if
- Lifting a heavy robot bothers you
- You want precise mapped coverage
Beatbot Sora 30: best for steps and shallow ledges
The Beatbot Sora 30 climbs regular steps and a ledge about 8 to 10 inches deep, cleans around on top and comes back down; the Aiper Scuba S1 tends to hang up on the same steps. When it finishes, it releases water and floats up to the edge, so there's no fishing with a hook. Beatbot rates it for pools up to about 3,230 square feet. Like the Sora 10, its 150-micron basket isn't fine enough for silt, and a 4-inch tanning ledge is too shallow for it.
Best for steps and ledges
Beatbot Sora 30
Climbs steps and 8-inch ledges, cleans on top, and floats to the surface when it's done.
- Cordless
- 6,800 GPH rated
- Surface parking
Good for
- Pools with steps and sun shelves
- Larger pools
Skip it if
- Fine silt is the main problem
- Ledges about 4 inches deep

Aiper Scuba S1: lightest to lift
The Aiper Scuba S1 is a steady performer: good wall, floor and step coverage, average suction, and better sand capture than the Scuba V3. At about 39 pounds full and 20 drained, it's the easiest to pull out. Its waterline parking only holds for about ten minutes before it sinks, so you'll often use the included hook, and it doesn't handle ledges. The hinged lid and floss basket are slow to clean.
Dolphin Cayman: best corded robot for small and mid-size pools
The Dolphin Cayman is the simplest way into hands-off cleaning: a weekly timer comes in the box, it climbs walls on tracks, and a top-load bin is easy to empty. Maytronics lists a two-hour cycle and a two-year warranty. It doesn't scrub the waterline, and its bin is smaller than the higher Dolphins', so heavy leaf drop means more emptying.
Best corded for small pools
Dolphin Cayman
A corded robot with a weekly timer included, so it cleans on schedule with no charging.
- Corded
- Weekly timer
- Top-load bin
Good for
- Hands-off daily cleaning
- Small to mid-size pools
Skip it if
- You want the waterline scrubbed
- Heavy leaf drop
Other pool robots worth knowing
- Aiper Scuba V3. A front camera hunts down debris and clears scattered leaves in about eight minutes, handy right before a swim, and it can clean an 8-inch shelf. On full runs it skips most of the steps and bench and blows some fine sand back into the water.
- Dolphin Premier. A corded Dolphin that swaps between an oversized leaf bag and fine or ultra-fine cartridges, scrubs the waterline, runs on a weekly timer and flags a full filter with a light on the power supply.
- WYBOT S3. A solar dock charges it and empties its basket, and it captures silt well, but it sometimes loses contact with its dock and app, auto-docking can fail, and a shaded yard may not give the panel enough sun.
- Dolphin Escape. A basic corded Dolphin for above-ground and small pools. It doesn't climb the full wall or clean the waterline, and the timer is an add-on.
- Mammotion Spino E1 and MOVA Diver A10. Both can get stuck in the deep end, and neither matches the picks above.
Planning the rest of the yard? See the robot lawn mower guide and the patio heater guide. For indoors, the robot vacuum and mop guide covers the same navigation questions.
Best for leaves and silt
Dolphin Nautilus EON 100
A very fine filter and a big bin, so it handles leaves and fine silt in the same run.
- Cordless
- Pools up to 50 ft
- Weekly timer
Good for
- Pools with trees and fine debris
- Owners who like a weekly schedule
Skip it if
- Lifting a heavy robot bothers you
- You want precise mapped coverage
Before you buy: power, delivery and setup
A corded robot's power supply needs a GFCI-protected outlet, no extension cord, and a spot well back from the pool edge; the exact distance is in each model's manual (see the Maytronics safety instructions). No outlet nearby? Have a licensed electrician add one. Some listings ship from third-party sellers, so check who sells it and backs the warranty.
Who should buy which
- Leaves and wide coverage: Beatbot Sora 10.
- Pollen or sand: ECOVACS Ultramarine P1.
- Leaves and silt together: Dolphin Nautilus EON 100.
- Steps and an 8-inch sun shelf: Beatbot Sora 30.
- Lightest to lift: Aiper Scuba S1.
- Scheduled cleaning, no charging: Dolphin Cayman.
Posted by Kristopher Larson
Frequently asked questions
Is a corded or cordless robotic pool cleaner better?
It depends on how hands-off you want to be. A corded robot with a weekly timer runs on its own schedule at full power for the whole cycle, and mostly needs its filter rinsed. A cordless robot skips the cable and the deck outlet, but you lift it out and charge it after runs. Some cordless robots also carry very fine filters, so pick by your pool's debris and layout, not the power type alone.
What is the best robotic pool cleaner for leaves?
Look for strong suction, a large basket and an exhaust that doesn't blow leaves back into the water. The Beatbot Sora 10 has an oversized basket and strong suction, and the Dolphin Nautilus EON 100 pairs a big bin with a very fine filter for pools that get both leaves and silt.
Which pool robot picks up sand, silt and pollen?
One with a fine filter. Standard 180-micron mesh lets silt and pollen pass back into the pool. The ECOVACS Ultramarine P1, with a 3-micron inner filter, and the Dolphin Nautilus EON 100, with a much finer main filter, keep fine debris in the basket. Corded Dolphins take ultra-fine cartridges.
Can a robotic pool cleaner clean a sun shelf or tanning ledge?
Only some can, and only above a minimum depth. The Beatbot Sora 30 and ECOVACS Ultramarine P1 climb onto a shelf about 8 inches deep and clean it. Ledges around 4 inches deep are too shallow for robots, so plan on brushing those by hand.
Do robotic pool cleaners clean the waterline?
Many reach it, but few scrub it well. The ECOVACS Ultramarine P1 climbs to the coping and scrubs hard, and the Dolphin Nautilus EON 100 reaches about 3 inches above the water with a lighter scrub. The Dolphin Cayman climbs walls but doesn't scrub the waterline. If your water level changes a lot, choose a robot that climbs a few inches above it.
What outlet does a corded pool robot need?
A GFCI-protected outlet, with the power supply placed well back from the pool edge at the distance the manual gives. Manufacturers say not to use an extension cord. If there's no suitable outlet near the pool, have a licensed electrician install one.
Keep reading
More from the blog
Best Wireless Microphone for Real Estate Video: Rode Wireless GO (Gen 3) vs. Wireless PRO vs. DJI Mic 3 vs. Hollyland Lark Max 2
Best Walkie Talkies: Rocky Talkie vs. Motorola Talkabout vs. Midland X-Talker for Hiking, Skiing and Outages
Doomsday Prep Essentials: A Home Emergency Checklist for Outages, Storms and Evacuations